Direct Metal Deposition Gets Drive Shafts up to Speed on Container Ships

(PresseBox) - A revolution in the production of sliding bearings: it?s only necessary to apply a layer of metal a few millimeters thick using the powder nozzle to reliably, cost-effectively, and easily protect the large shaft bearings used in ships from wear and tear. O.R. Lasertechnologie GmbH develops and builds robot-assisted laser systems for direct metal deposition (DMD) that take the production and repair of sliding bearings to an innovative new level.
The enormous container ships that now crisscross the world?s seas need powerful drives: diesel engines with outputs of up to 110,000 PS and as many as 14 cylinders. The shaft that drives the propeller has a diameter of about 600 mm, weighs up to 300 tonnes, and rotates 84 times a minute. The shaft rests inside hydrodynamic bearings that are naturally subject to heavy wear. This is because the shaft is in direct contact with and slides over the bearing?s surface. A film of lubricant reduces the inevitable friction, but doesn?t develop fully until the oil pressure rises.
Especially when engaging or disengaging the shaft, the protective film of oil is not yet or no longer sufficient to prevent direct contact between the surfaces. The affected parts of the bearing are therefore subjected to considerable friction and wear, which significantly reduces their life expectancy.
A commonly used way to improve the performance of these bearings is to cast their halves with an unbroken surface layer of a tribological, in other words wear-reducing, alloy. The conventional process used for this is extremely labor-intensive: the metals are melted and worked at 700°C. Then, in a laborious finishing phase, around 90% of the material is removed again to obtain the desired final shape. Little has changed in this process over the last century.
Today, latest-generation lasers can be used with a powder nozzle for direct metal deposition, yielding considerable benefits: the metal alloy is fed in the form of a dry powder via the nozzle coaxially to the laser and melted onto the inside of the concave steel bearing shells. The laser permits accurate partial attachment of the alloy. It is only necessary to apply the expensive alloy to about 20% of the surface using this technique, compared to 100% with the traditional casting method. Use of a laser also saves time and energy, since only a small amount of metal needs to be melted in each case.


The new generation of additive manufacturing is especially well-suited for bearings that are in constant use, have a large diameter, and are subjected to large bearing forces and high rotational speeds. It can also be used to inexpensively repair defective bearing shells and restore them to a like-new condition.
The ability to quickly change the alloy and apply coatings of nearly any kind of metal opens up incredible prospects for developing new products. AM enables completely new production processes that are able to flexibly accommodate customer wishes in a minimum of time.
Recently, the Berlin-based company of ADMOS Gleitlager began using a laser system from OR LASER. In addition to having more than 100 years of experience producing cast compound hydrodynamic sliding bearings, it is constantly engaged in improving its products and methods.
ADMOS is now taking a new approach to making sliding bearings: with a robot-assisted laser system, a six-kilowatt fiber laser, and two high-power coating heads in the form of powder nozzles. Something that was impossible with the conventional casting process is now becoming reality: namely the use of copper-based materials such as CuSn and CuPb. One of the many advantages of the new approach is that different materials now bind more firmly to one another. All in all, the new method makes it possible to completely eliminate several steps while minimizing the required finishing work afterward.
Right after powering up the laser system for the first time, it became clear that it reduced materials costs by between 50% and 80% thanks to resource-efficient application. The energy costs are also 50% to 70% less than for conventional casting of alloys.
Jörg Hosemann, the CEO of ADMOS Gleitlager, is thrilled: ?The new laser system opens up a whole new world of possibilities for us: faster production and delivery at short notice, as well as enormous potential for slashing costs. I expect the investment in new laser equipment to pay for itself in no time.?

Since founding O.R. Lasertechnologie GmbH in September 1997, Yhushua Resnik and Uri Resnik have steadfastly pursued the goal of developing new applications for lasers in materials processing and innovative laser technologies for a wide range of customers in the metal- and plastics-processing industries.
The company's comprehensive portfolio of products is the outcome of unceasing efforts to build on and apply many years of practical experience in the fields of laser welding and cladding.
Development and manufacture of laser equipment in Germany for companies that include Siemens, Bosch, Geberit, Freudenberg, and General Electric.
Solutions for the automotive and aerospace, mechanical engineering, electrical, medical, plastics, and tool- and mold making industries
Managing directors: Yhushua Resnik and Uri Resnik
Own branches: 6
International distributors and customer service providers: 30
Employees in Germany: 70
RD department: 20 staff
Market share: 25% worldwide across all relevant industries

Unternehmensinformation / Kurzprofil:
Bereitgestellt von Benutzer: PresseBox
Datum: 16.09.2016 - 09:25 Uhr
Sprache: Deutsch
News-ID 1400998
Anzahl Zeichen: 5743

Kontakt-Informationen:
Stadt:

Dieburg

Kategorie:

Optische Technologien

Diese Pressemitteilung wurde bisher 385 mal aufgerufen.

OR LASER bringt Digitale Fertigung in die nächste Dimension ...
OR LASER stellt auf der formnext 2017 seine neuen innovativen Konzepte und Lösungen zur additiven Fertigung vor: Mit dem ORLAS CREATOR hybrid, einer Anlage die 3D Druck und Fräsarbeiten in sich vereint, dem neuen ORLAS CUBE für den Auftrag mittels Pulverdüse und einem Cloud Manufacturing Konzept

OR LASER erhöht die Schlagzahl im Bereich Additiver Fertigung und präsentiert erneut innovative Lösungen auf der formnext in Frankfurt ...
Auch auf der diesjährigen formnext in Frankfurt wird OR LASER neue innovative Konzepte und Lösungen zur additiven Fertigung vorstellen: Mit dem ORLAS CREATOR hybrid, einer Anlage die 3D Druck und Fräsarbeiten in sich vereint, dem neuen ORLAS CUBE, der besonders geeignet für das Pulverauftragssch

Ausgezeichnet: ORLAS CREATOR erhält Red Dot Award für hohe Designqualität ...
Die Jury hat entschieden: nach der mehrtägigen Bewertung tausender Produkte aus aller Welt, erhielt der ORLAS CREATOR die Auszeichnung ?Red Dot?. OR LASER hat mit dem ORLAS CREATOR eine hervorragende Gestaltung geschaffen, was das Fachgremium des Red Dot Award: Product Design 2017 mit dem internat

Weitere Mitteilungen von O.R. Lasertechnologie GmbH

Direct Metal Deposition bringt Antriebswellen von Containerschiffen auf Hochtouren ...
Eine Revolution in der Produktion von Gleitlagern: Nur wenige Millimeter Metallschicht aus der Pulverdüse werden benötigt, um die großen Wellenlager in Schiffen oder Kraftwerken zuverlässig, kostengünstig und einfach vor Verschleiß zu schützen. O.R. Lasertechnologie GmbH entwickelt und produ

Live-Demo der SmartCleave? FI Technologie zum Laserschneiden von Glass und anderen spröden Materialien, Rekordergebnisse bei Labortests, anspruchsvolles Glasmarkieren mit UV und Pikosekundenlasern ...
ROFIN präsentiert das patentierte SmartCleave? FI Laserfilamentierungsverfahren zum Schneiden von Glas, Saphir, Keramik und anderen transparenten, spröden Materialien auf der Glasstec vom 20. -23. September in Düsseldorf. Darüber hinaus zeigt der Laserhersteller hochauflösende Glassmarkieranwe

Laser-Hightech von Trotec Laser auf der VISCOM 2016 ...
Als weltweit führender Hersteller für Lasergeräte zum Gravieren, Schneiden und Markieren präsentiert Trotec auf der VISCOM 2016 branchenübergreifende Laserlösungen mit einzigartigen und innovativen Features. Im Vordergrund steht die neue Generation der Laserschneider zur Bearbeitung von groß

JenLab gehört zu den TOP 100 ...
Zum 23. Mal wurden im Frühsommer die TOP 100 ausgezeichnet, die innovativsten Unternehmen des deutschen Mittelstands. Die JenLab GmbH gehört in diesem Jahr zu dieser Innovationselite. Das Unternehmen aus Jena nahm zuvor an einem anspruchsvollen, wissenschaftlichen Auswahlprozess teil. Untersucht