Ceramic Polymer: Safe coating tested for drinking water applications
Absolutely suitable for drinking water! Ceramic-Polymer KTW-1 passed test series according to DVGW-W270 and warm water up to 60 °C (140 °F)
(firmenpresse) - Ceramic Polymer GmbH constantly works on coating solutions for the ideal corrosion protection in different industries. The product CERAMIC-POLYMER KTW-1 was especially developed for the sensitive scope of drinking water installations. Recently, the coating was tested by the „Ruhr District Institute of Hygiene” in Gelsenkirchen/Germany in accordance with the German standard DVGW-W270 and for warm water applications (60 °C / 140 °F) subject to the coating guidelines of the Federal Environment Department (Germany).
To prove the unlimited harmlessness of CERAMIC-POLYMER KTW-1 the Ceramic Polymer have carried out extensive test series.
Warm water (60 °C / 140 °F)
The inspection for warm water suitability in accordance with the coating guidelines of the Federal Environment Department lasted 2 months. The purity of the coating is reflected in the results of the institute – the test values of the migration test are far below the requested limits!
DVGW-W270
The test concerning the growth of microorganisms on materials for use with drinking water in accordance with the code DVGW-Technical Regulations, Code of Practice W270 (11/2007) took 3 months. The test specimens were examined on slime formation and the growth of microorganisms after a defined schedule. The „biofilm formation“ on the coated surfaces remained at all measurements clearly below the limited values.
Therefore, CERAMIC-POLYMER KTW-1 is also qualified in microbiological aspects for drinking water applications up to 60 °C (140 °F).
Advantages of CERAMIC-POLYMER KTW-1
•solvent-free, special organo-ceramic® fillers
•tested for warm water (60 °C / 140 °F) and DVGW-W270 guidelines
•simple application by airless spraying method
•1-layer application
The specific organo-ceramic® fillers in CERAMIC-POLYMER KTW-1 are naturally occurring raw materials. They are absolutely metal-free and not synthetically produced or chemically treated. Prior to their use, the particles are purified at a temperature of 1.400°C (2,550 °F). Thereby, Ceramic Polymer obtain an extremely clean mineral filler.
In composition with a harmless, high functional epoxy resin base, Ceramic Polymer provide an innovative and entirely nonhazardous coating product for effective corrosion protection of drinking water installations.
CERAMIC-POLYMER KTW-1 is designed
• for the coating of new tanks
• for the repair of tanks
• for equipment and seals of pipelines
The Ceramic Polymer GmbH produces high-quality, solvent-free protective coatings for different kinds of industries. Due to the integration of microscopic ceramic and other special particles, coating systems with outstanding physical properties such as excellent chemical resistances, high temperature stabilities and extreme abrasion resistances are generated.
The Ceramic Polymer coatings are applied directly on the blasted substrate (e.g. steel, stainless steel, concrete) without the previous use of a primer. In this way extreme adhesion is achieved.
The scopes of the Ceramic Polymer coatings are for instance all kinds of storage tanks, pipelines or process vessels for the oil & gas industry as well as different maritime constructions, waste water or drinking water applications.
Ceramic Polymer GmbH
Stephanie Wuensch
Daimlerring 9
DE-32289 Roedinghausen / Germany
+49 (0)5223-96276-0
swu(at)ceramic-polymer.de
www.ceramic-polymer.de
Ceramic Polymer GmbH
Stephanie Wuensch
Daimlerring 9
DE-32289 Roedinghausen / Germany
+49 (0)5223-96276-0
swu(at)ceramic-polymer.de
www.ceramic-polymer.de
Datum: 07.02.2017 - 12:33 Uhr
Sprache: Deutsch
News-ID 522324
Anzahl Zeichen: 2757
contact information:
Contact person: Stephanie Wuensch
Town:
Roedinghausen
Phone: +49 (0)5223-96276-23
Kategorie:
Commodity Chemicals
Typ of Press Release: Produktinformation
type of sending: Veröffentlichung
Date of sending: 07.02.2017
Diese Pressemitteilung wurde bisher 669 mal aufgerufen.
Die Pressemitteilung mit dem Titel:
"Ceramic Polymer: Safe coating tested for drinking water applications "
steht unter der journalistisch-redaktionellen Verantwortung von
Ceramic Polymer GmbH (Nachricht senden)
Beachten Sie bitte die weiteren Informationen zum Haftungsauschluß (gemäß TMG - TeleMedianGesetz) und dem Datenschutz (gemäß der DSGVO).
