Ceramic Polymer: Coating of copper block heat exchanger by flood method with low viscosity PROGUARD CN-1M
The company “Zacosin® the surface experts”, located in Gladbeck/Germany, is specified on surface protection of different devices and plant components as well as the wide scope of thermal process technology
(firmenpresse) - For several years, the product PROGUARD CN-1M is applied for new coating or repair of coolers and water chambers made of copper, steel or cast aluminum. Furthermore, the system is used as sealing of thermal coated, enameled heat exchanger.
The coating of the big copper blocks usually takes 1.5 hours by flood process to achieve layer thicknesses of approx. 250 - 350 µm. One coat is enough to protect the heat exchanger tubes durably against corrosion and dirt deposits. The curing of the coated cooler lasts 24 hours at room temperature. The procedure can be shortened to 12 hours through the use of a 40 °C fan heater. Thus, down times of the cooling facilities can be clearly reduced.
Application Details
Project: Coating of so far 25 copper blocks cooler for different industries by flood method
Coating product: Low viscosity version of PROGUARD CN-1M
Layer thickness: 250 - 350 µm
Product properties: Durable temperature resistance of 150 °C; excellent stability against chemical influences; high flowability, therefore efficient coating by flood method possible.
Also available as cartridge systems for efficient repair on site
Ceramic Polymer GmbH has especially designed selected coatings for advanced cartridge application with Sulzer Mixpac Technology. This method facilitates a clean and cost-saving application for small projects and areas which are difficult to reach; also includes any kind of heat exchanger. Zacosin® uses PROGUARD CN-1M for the repair of damaged protective coating directly on site. With the compact Sulzer spray dispenser, the application is conducted partially and economical. No time-consuming transport of the cooler is necessary for small applications or repair. After short curing times the unit can directly take into service.
Reduction of conventional maintenance expenses
The smooth surface texture of the coating system effectively prevents heavy dirt deposits and incrustation between the tubes. The cleaning is considerably simplified. Thus, the operating and maintenance costs are clearly reduced. The heat transfer remains constant, the efficiency and safety of the coolers are preserved in the long term. In summary, the service life and the use of heat exchangers are noticeably increased with a suitable coating.
Themen in dieser Pressemitteilung:
Unternehmensinformation / Kurzprofil:
The Ceramic Polymer GmbH produces high-quality, solvent-free protective coatings for different kinds of industries. Due to the integration of microscopic ceramic and other special particles, coating systems with outstanding physical properties such as excellent chemical resistances, high temperature stabilities and extreme abrasion resistances are generated.
The Ceramic Polymer coatings are applied directly on the blasted substrate (e.g. steel, stainless steel, concrete) without the previous use of a primer. In this way extreme adhesion is achieved.
The scopes of the Ceramic Polymer coatings are for instance all kinds of storage tanks, pipelines or process vessels for the oil & gas industry as well as different maritime constructions, waste water or drinking water applications.
Ceramic Polymer GmbH
Stephanie Wuensch
Daimlerring 9
DE-32289 Roedinghausen / Germany
+49 (0)5223-96276-0
swu(at)ceramic-polymer.de
www.ceramic-polymer.de
Ceramic Polymer GmbH
Stephanie Wuensch
Daimlerring 9
DE-32289 Roedinghausen / Germany
+49 (0)5223-96276-0
swu(at)ceramic-polymer.de
www.ceramic-polymer.de
Datum: 19.07.2018 - 10:23 Uhr
Sprache: Deutsch
News-ID 578453
Anzahl Zeichen: 2646
contact information:
Contact person: Stephanie Wuensch
Town:
Roedinghausen
Phone: +49 (0)5223-96276-23
Kategorie:
Chemical industry
Typ of Press Release: Produktinformation
type of sending: Veröffentlichung
Date of sending: 18.07.2018
Diese Pressemitteilung wurde bisher 264 mal aufgerufen.
Die Pressemitteilung mit dem Titel:
"Ceramic Polymer: Coating of copper block heat exchanger by flood method with low viscosity PROGUARD CN-1M"
steht unter der journalistisch-redaktionellen Verantwortung von
Ceramic Polymer GmbH (Nachricht senden)
Beachten Sie bitte die weiteren Informationen zum Haftungsauschluß (gemäß TMG - TeleMedianGesetz) und dem Datenschutz (gemäß der DSGVO).
