Corrosion Protection Made Easy! High-Quality Cartridge Systems with Ceramic Polymer Coatings
Ceramic Polymer GmbH now offer efficient cartridge application for some selected products. The company decided to implement the advanced Mixpac technology from the company Sulzer to simplify the complex coating application procedure significantly. An optimum solution for repairs, small projects or areas which are difficult to access!
Due to the low weight exact spraying over a long period is possible. (firmenpresse) - Ceramic Polymer GmbH now offer efficient cartridge application for some selected products. The company decided to implement the advanced Mixpac technology from the company Sulzer to simplify the complex coating application procedure significantly. An optimum solution for repairs, small projects or areas which are difficult to access!
ADVANTAGES OF THE CARTRIDGE TECHNOLOGY
COST SAVINGS
- Low Invest - cost-efficient solution for a wide range of small applications
- shorter working time, no need of extensive mixing procedure
- prevention of mixing failures
- no loss of material, no cured residues in the package
SIMPLE APPLICATION
- automatic mixing allows exact mixing ratio
- even application, low spray losses
- cold application possible (20°C), without preheating
- portability - leightweight, portable dispenser for versatile use
HIGH-QUALITY COMPONENTS
- solid MIXPACTM cartridge of Sulzer Chemtech Technology
- patented cartridge seal
- spray mixer tried and tested QUADROTM mixing technology
- clean resealable after use, remaining material usable for at least 6 months
STP-EP-HV Cartridge
FEATURES
- surface tolerant
- resistant against hydrocarbons
- resistant against sea water
- excellent abrasion resistance
- high temperature stability (long-term up to 120°C)
- solvent-free
- recommended layer thickness > 500 µm (20 mils) - sagging limit for vertical surfaces: 1000 µm (40 mils)
SALES UNIT
- 1.5 kg Cartridge - 1000 ml volume of matched mixing ratio
- coverage approx. 1.5 m2 , at a thickness of 500 µm (20 mils)
COLOR
Gray
CN-1M Cartridge
FEATURES
- excellent chemical resistance
- high temperature stability (long-term up to 150°C)
- high abrasion resistance
- high adhesion on steel and concrete
- solvent-free
- 1-layer-system
- recommended layer thickness > 400 µm (16 mils)
SALES UNIT
- 1.2 kg Cartridge - 1000 ml volume of matched mixing ratio
- coverage approx. 2 m2 , at a layer thickness of 400 µm (16 mils)
COLOR
- black
CN-OC Cartridge
FEATURES
- especially for stainless steel, aluminum and zinc coated surfaces
- excellent chemical resistance
- high temperature stability (long-term up to 150°C)
- high abrasion resistance
- outstanding adhesion
- solvent-free
- 1-layer-system
- recommended layer thickness > 400 µm
SALES UNIT
- 1.2 kg Cartridge - 1000 ml volume of matched mixing ratio
- coverage approx. 2 m2 , at a layer thickness of 400 µm (16 mils)
COLOR
- black
Suitable dispenser of the company Sulzer are available from us. We offer 2 different types for the fast, clean and economic application of 2-component coatings:
MANUAL DISPENSER
MixCoatTM Manual System is a lightweight, manual dispenser, which is excellently suited for repair purposes of all kinds. The applied coating is easy to distribute by conventional hand tools e. g. spatula.
For the protection of welds and edges an appropriate mixing tip with brush is additionally available.
SPRAY DISPENSER
MixCoatTM Spray is a lightweight spray dispenser. This device requires only a pressurized air connection (compressor, 7 bar, 250 l/min). Due to the low weight exact spraying over a long period is possible. Moreover, the dispenser can be operated with one hand.
For the completion of this system the Hybrid-Flex-System can also be purchased. The dispenser is put on easily with a belt; the flexible hose (1.5 m or 3 m) with the attached spray nozzle provides a proper coating result. This combination is the ideal solution for spray coating of small surfaces or areas which are difficult to access.
Themen in dieser Pressemitteilung:
Unternehmensinformation / Kurzprofil:
The Ceramic Polymer GmbH produces high-quality, solvent-free protective coatings for different kinds of industries. Due to the integration of microscopic ceramic and other special particles, coating systems with outstanding physical properties such as excellent chemical resistances, high temperature stabilities and extreme abrasion resistances are generated.
The Ceramic Polymer coatings are applied directly on the blasted substrate (e.g. steel, stainless steel, concrete) without the previous use of a primer. In this way extreme adhesion is achieved.
The scopes of the Ceramic Polymer coatings are for instance all kinds of storage tanks, pipelines or process vessels for the oil & gas industry as well as different maritime constructions, waste water or drinking water application
Ceramic Polymer GmbH
Stephanie Wuensch
Daimlerring 9
DE-32289 Roedinghausen / Germany
+49 (0)5223-96276-0
swu(at)ceramic-polymer.de
www.ceramic-polymer.de
Ceramic Polymer GmbH
Stephanie Wuensch
Daimlerring 9
DE-32289 Roedinghausen / Germany
+49 (0)5223-96276-0
swu(at)ceramic-polymer.de
www.ceramic-polymer.de
Datum: 02.06.2016 - 11:11 Uhr
Sprache: Deutsch
News-ID 475229
Anzahl Zeichen: 4552
contact information:
Contact person: Stephanie Wuensch
Town:
Roedinghausen
Phone: +49 (0)5223-96276-23
Kategorie:
Various
Typ of Press Release: Produktinformation
type of sending: Veröffentlichung
Date of sending: 02.06.2016
Diese Pressemitteilung wurde bisher 560 mal aufgerufen.
Die Pressemitteilung mit dem Titel:
"Corrosion Protection Made Easy! High-Quality Cartridge Systems with Ceramic Polymer Coatings"
steht unter der journalistisch-redaktionellen Verantwortung von
Ceramic Polymer GmbH (Nachricht senden)
Beachten Sie bitte die weiteren Informationen zum Haftungsauschluß (gemäß TMG - TeleMedianGesetz) und dem Datenschutz (gemäß der DSGVO).
