CONEC IP67 USB 3.0 Connector Series

SuperSpeed-USB for use in harsh environments

(PresseBox) - The IP67 USB3.0 series is the new member to CONEC IP67 series connector family.
USB 3.0 provides data transfer rates 10 times faster than USB 2.0. Integrated into the CONEC bayonet locking housing the USB 3.0 connectors become suitable for industrial applications. The bayonet locking design allows a fast, simple and robust IP67 protected connection and ensures protection against environmental influences in rough conditions.
The new USB 3.0 Type A is plug compatible to USB 2.0 Type A. I.e. the Type A USB 3.0 connectors and sockets do fully accept all Type A connectors from the former generations. USB 3.0 Type B and Type Micro-B sockets are suitable to accept USB 2.0 Type B and Type Micro-B connectors, but vice versa those connections cannot be mated together.
The difference between USB 2.0 and USB 3.0 is that an additional signal pair allows full duplex data transfer, i.e. USB 3.0 can read and write data simultaneously at full speed. This is the first time a bidirectional data transfer is incorporated into the Universal Serial Bus.
A further improvement of USB 3.0 is the increased maximum unit load. USB 3.0 supports up to six devices with up to 150 mA load per device, i.e. a total load of 900 mA.
The IP67 USB 3.0 connector series is available in plastic and metallised plastic. The Type A / Type A panel mounted receptacles are suitable for front and rear panel mounting. The cable connector accepts cable diameter between 4.0 mm and 6.0 mm. Besides the single connector the following cable assemblies are available in different lengths:
? IP67 USB Type A to IP67 USB Type A
? IP67 Type A Plug to USB 3.0 Type A overmoulded (IP20)
? IP67 Type A Plug to USB 3.0 Type B overmoulded (IP20)
? IP67 Type A Plug to USB 3.0 Type Micro-B overmoulded (IP20)
To protect the connector against dirt and moisture in unmated condition, protection caps with tether are available.

Benefits:
? Use in harsh environments due to protection class IP67
? Quick and easy bayonet locking type
? Data transmission up to 4.8 Gigabit
? Backwards compatible with USB 2.0
? Maximum unit load up to 900 mA
Fields of application:
? Automation technology
? Building automation
? Process Automation
? GPS navigation
? Industrial interfaces
? Cable Assembly
? Security and Monitoring Systems
? Communication Technology
? Blu-Ray Drives
? External Hard Drives for harsh environment

Unternehmensinformation / Kurzprofil:
Bereitgestellt von Benutzer: PresseBox
Datum: 01.05.2017 - 08:00 Uhr
Sprache: Deutsch
News-ID 539266
Anzahl Zeichen: 2815

contact information:
Town:

Lippstadt

Kategorie:

Telecommunication

Diese Pressemitteilung wurde bisher 263 mal aufgerufen.


Die Pressemitteilung mit dem Titel:
"CONEC IP67 USB 3.0 Connector Series"
steht unter der journalistisch-redaktionellen Verantwortung von

CONEC Elektronische Bauelemente GmbH (Nachricht senden)

Beachten Sie bitte die weiteren Informationen zum Haftungsauschluß (gemäß TMG - TeleMedianGesetz) und dem Datenschutz (gemäß der DSGVO).

M8x1 sensor connectors with 2 and 3 LED´s ...

CONEC M8x1 connectors with 2 or 3 integrated LEDs are ideally suited for sensor/actuator cabling in factory automation, mechanical and plant engineering, conveyor and packaging technology, as well as in testing and inspection systems. They are used w ...

CONEC Hybrid connectors ...

In conventional wiring of electric motors, servo drives, or linear units, the effort involved is often very high. Separate cables are used for power, data, and signal transmission for different tasks. This wiring concept is not only expensive but als ...

The M12 Bayonet System from CONEC ...

In an era where efficiency, speed, and cost savings are key success factors in connection technology, CONEC sets a new benchmark with its M12 bayonet system. Where innovation meets application: Fast, secure, and tool-free The M12 bayonet system not o ...

Alle Meldungen von CONEC Elektronische Bauelemente GmbH