Coatings for Process Components
Severe damage by pitting corrosion: Electric motor was efficiently restored with ARC- and Ceramic-Polymer-Systems
(firmenpresse) - The Greek company ”Hellenic Petroleum“ owns a plant for polypropylene in Thessaloniki. Here, a
medium voltage motor for pumps of cooling water circulation was effectively restored. The motor has been in use since 2000. It showed severe erosion and pitting corrosion damages at the impeller housing and connection box. The repair coating ARC 858(E) of the parent company A. W. Chesterton together with Ceramic-Polymer coating systems enables an efficient renewal and fast restart of the electric motor (type ATEX).
The company is located in Greece very close to the sea. The constantly moist, salt-laden air and the evaporation of cooling water with the contained chemicals cause heavy corrosion damages on the motor frame. Thus, protection systems against the aggressive environmental conditions were significant for this project.
Especially for process components such as pumps, machine elements and motors the premium coatings of the Chesterton series ”ARC Efficiency & Protective Coatings“ are qualified for the effective re-building of erosion-damaged parts. Therefore, together with the high-performance Ceramic-Polymer coatings optimum protection against corrosion and erosion is achieved!
Protection concept for aggressive industrial environments
803(E): Cleaning solution for removal of old coating
ARC 858(E): Ceramic reinforced 2-component thick film epoxy compound to protect metal surfaces subjected to erosion, corrosion and chemical attack
CERAMIC-POLYMER STP-EP-HV: 2-component ceramic composite epoxy coating providing outstanding corrosion and abrasion protection for aggressive environments
PROGUARD 169(37): Color stable 2-component polyurethane top coat with long-term resistance to UV-radiation and weathering
Our coatings fulfill highest protection requirements
ISO 12944-2, C5-I:
Very high atmospheric corrosiveness at industrial areas with high humidity and an aggressive environment
Resistance to chemical contents of the cooling water:
Sulfuric acid, sodium hypochlorite, NALCO (special chemical for cooling water conditioning e. g. zinc chloride, phosphoric acid, methanol, formaldehyde)
1.) Previous condition: The whole motor showed corrosion damages. On connection box and impeller housing severe pitting corrosion occurred. 4 motors in total are installed in this plant, the first has now been renovated with our systems.
2.) Prior to the coating the surfaces were cleaned with 803(E), afterwards sand blasted according to purity level SA3 and an average surface roughness of 75 µm.
3.) ARC 858(E), a ceramic reinforced thick-film coating system especially for erosion-prone areas, was used for the smoothing and filling of the damaged surfaces. The curing time was 20 hours at 15 °C.
4.) Before the protective coating was applied the surface was again sandblasted. The repaired areas were roughened by sweeping. The application of CERAMIC-POLYMER STP-EP-HV was conducted in 2 steps: pre-coating of edges, ventilation screens and blades was passed with brush or roller to increase the total layer thickness in these sensible zones. Following, the coating was applied by airless spraying with a thickness of 350 µm. The curing time was also 20 hours at a room temperature of 20 °C.
5.) The top coat PROGUARD 169(37) was also applied on edges by brush, then sprayed wet-on-wet by airless in 2 layers with a total DFT of 80 µm.
Themen in dieser Pressemitteilung:
efficiently-restored
aggressive-industrial-environments
electric-motor
pumps-of-cooling-water-circulation
Unternehmensinformation / Kurzprofil:
The Ceramic Polymer GmbH produces high-quality, solvent-free protective coatings for different kinds of industries. Due to the integration of microscopic ceramic and other special particles, coating systems with outstanding physical properties such as excellent chemical resistances, high temperature stabilities and extreme abrasion resistances are generated.
The Ceramic Polymer coatings are applied directly on the blasted substrate (e.g. steel, stainless steel, concrete) without the previous use of a primer. In this way extreme adhesion is achieved.
The scopes of the Ceramic Polymer coatings are for instance all kinds of storage tanks, pipelines or process vessels for the oil & gas industry as well as different maritime constructions, waste water or drinking water applications.
Ceramic Polymer GmbH
Stephanie Wuensch
Daimlerring 9
DE-32289 Roedinghausen / Germany
+49 (0)5223-96276-0
swu(at)ceramic-polymer.de
www.ceramic-polymer.de
Datum: 11.07.2019 - 09:10 Uhr
Sprache: Deutsch
News-ID 595598
Anzahl Zeichen: 3675
contact information:
Contact person: Stephanie Wuensch
Town:
32289 Roedinghausen
Phone: Tel.: +49 (0)5223-96276-23
Kategorie:
Commodity Chemicals
Typ of Press Release: Product
type of sending: send
Date of sending: 11.07.2019
Diese Pressemitteilung wurde bisher 286 mal aufgerufen.
Die Pressemitteilung mit dem Titel:
"Coatings for Process Components"
steht unter der journalistisch-redaktionellen Verantwortung von
Ceramic Polymer GmbH (Nachricht senden)
Beachten Sie bitte die weiteren Informationen zum Haftungsauschluß (gemäß TMG - TeleMedianGesetz) und dem Datenschutz (gemäß der DSGVO).
