Energy savings of 55 percent in vacuum supply
Large quantities of various types of paper napkins leave the Duni plant in Posen, Poland every day. The modern Duni Group plant produces paper napkins in Poland for the worldwide market.
R5 rotary vane vacuum pump for vacuum supply in paper napkin production(firmenpresse) - Duni switched to using R5 rotary vane vacuum pumps from Busch to supply the cutting and folding machines with vacuum and thus achieved energy savings of 55 percent compared to the previous vacuum supply. Moreover, the rotary vane vacuum technology provides stable and reliable vacuum generation with significantly lower noise emissions and a smaller footprint.
Duni Group, with headquarters in Sweden, owns the Duni Poland Sp. z o.o. production plant. Duni can look back on over 60 years of company history. It all began in Malmö, Sweden, where the first waxed paper cups and napkins from thin, coated crepe paper were made in 1949. Nowadays, Duni produces packaging and takeaway solutions like tableware for restaurants and end customers. Duni occupies the leading position in the central and northern European market with 2,300 employees in 23 countries. Duni Poland in Posen has 400 employees; the plant focuses on producing paper napkins and printed paper plates.
The various paper types and grammages for napkin production are delivered on rolls. The rolled up paper runs through one of several automated production lines in which the napkins are produced and prepared for dispatch. Whether the material is printed or imprinted, at the end of the production line, there is always a machine that cuts the paper several times and folds it up to three times before the finished napkins are packaged. These cutting and folding machines can be set up to make the various formats and folds possible. Vacuum is needed to transport and hold the paper as it is moved through the rollers, and cutting and folding tools to the end of the line where it comes out as finished napkins.
In the past, liquid ring vacuum pumps were installed on three of these cutting and folding machines to generate the necessary vacuum. These vacuum pumps were high-maintenance because the water used as the operating fluid needed to be refilled every day. As oil is used to lubricate the knife of the cutting tools, it is impossible to prevent the extracted air from containing oil particles. This causes oil to mix with the water in the vacuum pumps. The water used as operating fluid in each of the three identical liquid ring vacuum pumps circulated in the system. Being contaminated with oil it had to be completely replaced and disposed of regularly. The engineer responsible for production engineering no longer wanted to tolerate this situation. Especially because the noise emissions of these liquid ring vacuum pumps, which were in the immediate vicinity of the workstations, were so high. He also tried to find a solution that consumed less energy.
Experiments with dry-running rotary vane vacuum pumps were disappointing because the extracted air corroded the graphite vanes due to the oil it contained. Duni therefore decided to contact Busch, because vacuum pumps from Busch were already being used on two flexographic printing machines to their complete satisfaction. Busch's vacuum specialists recommended R5 oil-lubricated rotary vane vacuum pumps for this application. These vacuum pumps each have a pumping speed of 630 cubic metres per hour and have sufficiently high output to supply all rollers and devices with vacuum. They are also able to extract the air that leaks through the paper without limiting the output. In turn, the high constant vacuum performance with an ultimate pressure of 0.1 mbar helps to securely and quickly transport and hold the paper. An R5 rotary vane vacuum pump was installed on a cutting and folding machine at the beginning of 2016. The benefits of this solution quickly became apparent. The power consumption was reduced by 55 percent, the value of which is even better when you take into account that work is carried out in three-shift operation, 24 hours a day, five to six days per week. The vacuum pump runs constantly during this time, except for breaks and set-up times. The maintenance effort was drastically reduced and is limited to regular visual inspections of the oil level and an annual oil and filter change. The oil particles sucked in used to be a cause of high maintenance effort in the past. Now they remain in the vacuum pump which uses mineral oil as operating fluid anyway.
R5 rotary vane vacuum pumps have been the standard solution for vacuum generation in various applications for several decades. Thanks to their internal oil circulation, they can handle liquid particles that have been sucked into the vacuum pump. The oil ensures excellent sealing and lubrication of the compression chamber, making it possible to achieve a high vacuum level of 0.1 mbar. This value corresponds to a 99.99 percent vacuum. Due to their design, liquid ring vacuum pumps can achieve an ultimate pressure of 33 mbar (= 96.7 percent) under ideal operating conditions. Dry-running rotary vane vacuum pumps work according to the same compression principle as oil-lubricated rotary vane vacuum pumps. However, they do not use oil, which results in a loss in ultimate pressure. This means that these types of vacuum pumps in comparable sizes only supply a vacuum level of 200 mbar (= 80 percent). The high vacuum level of 0.1 mbar of R 5 rotary vane vacuum pumps now provides sufficient output reserves for paper handling in the cutting and folding machines. This means that format changes or leaked air do not affect the provision of constantly high pumping speeds and availability of the same vacuum level.
The responsible parties were impressed by the R5 rotary vane vacuum pump's low noise level, which was significantly lower than that of the previously used liquid ring vacuum pump. The current solution is also much more compact and thus saves space.
Based on these positive experiences, Duni also equipped each of the two other cutting and folding machines with an R5 rotary vane vacuum pump of the same size in the same year.
All three vacuum pumps from Busch have supplied a constantly high level of vacuum and pumping speed without complaints of any kind after one year of continuous operation.
In the meantime, Duni has concluded a maintenance contract with Busch, which guarantees the provision of regular maintenance work by a Busch service technician and full availability of all Busch vacuum pumps in the entire facility. This means that if a vacuum pump should ever actually fail, Busch will immediately provide a replacement vacuum pump.
Unternehmensinformation / Kurzprofil:
Busch Vacuum Solutions is one of the world’s largest producers of vacuum pumps, vacuum systems, blowers and compressors.
Its extensive product portfolio comprises solutions for vacuum and overpressure applications in all industries, including the chemical, semiconductor, medical technology, plastics, and food sectors. It also covers the design and construction of customized vacuum systems, as well as a global service network.
The Busch group is a family-owned company and is still managed by the Busch family. Busch Vacuum Solutions has 3,500 employees in more than 60 companies in over 40 countries worldwide. Busch is headquartered in Maulburg, in southwest Germany. This is the location of Busch SE headquarters, as well as the German production facility and German sales company. In addition to Maulburg, Busch also has its own production plants in Switzerland, the UK, Czech Republic, Korea and the USA.
Jasmin Markanic
Coordinator Global Press & Media Relations
+49 (0) 7622 681-3376
Jasmin.markanic(at)busch.de
Busch Vacuum Solutions
Schauinslandstraße 1
79689 Maulburg, Germany
www.buschvacuum.com
Datum: 21.10.2020 - 11:44 Uhr
Sprache: Deutsch
News-ID 621376
Anzahl Zeichen: 6708
contact information:
Contact person: Jasmin Markanic
Town:
Maulburg
Phone: +49 (0) 7622 681-3376
Kategorie:
Manufacturing & Production
Typ of Press Release: Success
type of sending: send
Date of sending: 21.10.2020
Diese Pressemitteilung wurde bisher 314 mal aufgerufen.
Die Pressemitteilung mit dem Titel:
"Energy savings of 55 percent in vacuum supply"
steht unter der journalistisch-redaktionellen Verantwortung von
Busch Vacuum Solutions (Nachricht senden)
Beachten Sie bitte die weiteren Informationen zum Haftungsauschluß (gemäß TMG - TeleMedianGesetz) und dem Datenschutz (gemäß der DSGVO).
