Manual or automated cleaning of tube bundle heat exchangers and separate tubes through TubeMaster.
Gently, effectively and without water.
(PresseBox) - mycon GmbH developed its purification process TubeMaster a long time ago. TubeMaster cleans small tubes with a diameter of approximately 50 mm, when using a special version even tubes with a diameter of 100 mm. This purification process even achieves better results than high pressure cleaning methods using up to 2500 bar.
TubeMaster is especially commendable and effective for the purification of sulfur condensers for example, as they are impossible to be cleaned with water. In this case, water would cause sulfuric acid which would consequently corrode and thus destroy the tubes.
With a jet pressure of 6.5 bar, the patented purification process TubeMaster AS successfully cleans straight, long tubes even those with tenacious build-up. Applying a special version, curved tubes can also be cleaned with a decreased amount of cleaning power.
A further development of TubeMaster now enables adjusting the cleaning under consideration of the tube material as soon as it reaches the customer. Optionally, the surface quality of the tubes’ inner surface can be improved during the cleaning process through simultaneous polishing. Thus, the productive capacity and overall transmission time can be increased while energy costs can be reduced.
When the automated version TubeMaster AS is in use, the cleaning speed can be adjusted to the respective requirement. The cleaning process thus occurs under consideration of the same parameters which leads to a highly qualitative cleaning result. The tubes’ inner surface gets to a continually polished state if special, corresponding components are used. The simultaneous material abrasion is kept to such a low degree that it could not yet be measured.
TubeMaster can be used as a compact process, in the manual and the automated version. Within the compact process, build-up and resources are extracted, immediately collected and afterwards made available for waste disposal.
TubeMaster can be used for cleaning vertically or horizontally arranged tube bundle heat exchangers. TubeMaster can be transported through manway openings without difficulty for the installation in front of the exchanger, also in the automated version. Furthermore, for the cleaning of individual tubes special articles for coupling connections are delivered as well. Operating the machine is definitely trouble-free and usually requires just two members of staff.
About mycon GmbH
mycon GmbH, a sister company of the service company Kipp Umwelttechnik GmbH, develops, manufactures and markets new products and automation technologies.
mycon GmbH currently services customers in approx. 40 countries.
Many years of experience in the field of industrial services led to several system developments and patents, some of which have received international recognition.
mycon GmbH supports customer groups from various industry and service sectors:
- Automotive industry
- Trains
- Construction and building renovation industry
- Chemical industry
- Printing industry
- Electrical industry
- Incineration plants / waste disposal companies
- Foundry industry
- Municipal enterprises
- Power generation industry
- Plastics industry
- Paint and coating industry
- Food industry
- Mechanical engineering
- Oil and gas industry
- Steel industry
- Textile industry
Unternehmensinformation / Kurzprofil:
About mycon GmbH
mycon GmbH, a sister company of the service company Kipp Umwelttechnik GmbH, develops, manufactures and markets new products and automation technologies.
mycon GmbH currently services customers in approx. 40 countries.
Many years of experience in the field of industrial services led to several system developments and patents, some of which have received international recognition.
mycon GmbH supports customer groups from various industry and service sectors:
- Automotive industry
- Trains
- Construction and building renovation industry
- Chemical industry
- Printing industry
- Electrical industry
- Incineration plants / waste disposal companies
- Foundry industry
- Municipal enterprises
- Power generation industry
- Plastics industry
- Paint and coating industry
- Food industry
- Mechanical engineering
- Oil and gas industry
- Steel industry
- Textile industry
Datum: 29.12.2021 - 12:47 Uhr
Sprache: Deutsch
News-ID 652958
Anzahl Zeichen: 3692
contact information:
Town:
Bielefeld
Kategorie:
Tradeshows
Diese Pressemitteilung wurde bisher 463 mal aufgerufen.
Die Pressemitteilung mit dem Titel:
"Manual or automated cleaning of tube bundle heat exchangers and separate tubes through TubeMaster."
steht unter der journalistisch-redaktionellen Verantwortung von
mycon GmbH (Nachricht senden)
Beachten Sie bitte die weiteren Informationen zum Haftungsauschluß (gemäß TMG - TeleMedianGesetz) und dem Datenschutz (gemäß der DSGVO).
