Metal bellows coupling KP - Short coupling

(PresseBox) - The metal bellows coupling series KP with 4-corrugated bellows and two radial clamping hubs, is a version with short overall length in the JAKOB coupling range. This makes it particularly suitable for applications with minimal shaft spacing and limited installation conditions. In addition, the very high torsional rigidity ??and the easy-to-install clamping hub design are worth mentioning. A low moment of inertia and good values ??for the permissible shaft misalignments and restoring forces complete the positive picture.

The multi-layer, made of certified stainless steel, metal bellows is characterized by its high torsional rigidity as well as the compensation of axial, radial and lateral shaft offsets. Due to the shortened design and the resulting weight savings, there are other advantages such as lower moments of inertia.

The clamping hub is made of high-strength aluminum to achieve the lowest possible moment of inertia. The hubs are equipped with the innovative and service-friendly Easy-Clamp-System. It guarantees a simple, with enough fitting tolerance provided postponement. A single, radially accessible screw per hub provides the for torque transmission necessary preload force. Thanks to this simple, but very reliable connection, the couplings can be mounted in just a few easy steps, even in difficult installation conditions. The bellows-hub connection is made by the optimal and backlash-free brass-wire press-fit method. In contrast to adhesive joints, this joining process is absolutely unlimited for critical operating conditions (-40 ° C to + 200 ° C, chemicals) and the transmission torque of each individual bellows layer is safely introduced into the hub.

The KP series is available for nominal torques from 25 to 900 Nm with bore diameters from 10 to 75 mm.

Weitere Infos zu dieser Pressemeldung:
Unternehmensinformation / Kurzprofil:
Bereitgestellt von Benutzer: PresseBox
Datum: 31.10.2023 - 14:49 Uhr
Sprache: Deutsch
News-ID 693733
Anzahl Zeichen: 1864

contact information:
Contact person: Jan Möller
Town:

Kleinwallstadt

Phone: +49 (6022) 2208-55

Kategorie:

Tradeshows

Diese Pressemitteilung wurde bisher 226 mal aufgerufen.


Die Pressemitteilung mit dem Titel:
"Metal bellows coupling KP - Short coupling"
steht unter der journalistisch-redaktionellen Verantwortung von

JAKOB Antriebstechnik GmbH (Nachricht senden)

Beachten Sie bitte die weiteren Informationen zum Haftungsauschluß (gemäß TMG - TeleMedianGesetz) und dem Datenschutz (gemäß der DSGVO).

Metal bellows coupling KG ...

The metal bellows couplings series KG, optionally also available in stainless steel as series "KG-VA", meets high requirements. The transmission is made via torsionally rigid, two-, four- or six shaft stainless steel bellows, the couplings ...

Metal bellows coupling KP with clamping hubs ...

The metal bellows coupling of the KP series is characterized by its short design and a 4-wave bellows with two radial clamping hubs. This compact design is ideal for applications with minimal shaft spacing and limited space. The high torsional rigidi ...

Power clamping nut MDA multiplies tightening torque ...

The current model of the mechanical power clamping nut MDA combines the simplest, manual operation at low tightening torques ??with the highest clamping forces. The interior can multiply the manual tightening torque by means of a robust gear transmis ...

Alle Meldungen von JAKOB Antriebstechnik GmbH