Form-fitted hub version

Internal toothing with Keyway for gearbox

(PresseBox) - Bellows couplings are used to connect two shaft journals, for example the motor and gearbox of a drive unit. They must be torsionally rigid, flexible, easy to install, economical, precise and very resilient. The bellows couplings with internal gearing from JAKOB Antriebstechnik meet these requirements.

The shaft-hub connection using a combination of clamping hub and gearing is particularly advantageous for gearboxes, as it has very little imbalance. It is also ideal for large one-sided torques, but also for changing and shock-like torques. Before the coupling is mounted on the motor shaft, the clamping hub is elastically expanded. The necessary counterpressure is generated by unscrewing the clamping screw against the so-called EASY pin. The coupling can then be easily placed on the shaft and tightened using the hexagon socket. When the motor and gearbox are connected via the lantern, the coupling hub centers itself and is mounted positively on the gear shaft of the gearbox. No further complicated tightening via mounting holes in the lantern is necessary.

The precisely manufactured internal gearing and a full inspection create a very precise connection to the drive shaft. This means that the installation space can be reduced and no further connecting elements are required. An important point in terms of cost-effectiveness. Finally, an optional forced drive ensures reliability and safety in the event of a bellows break due to overload or excessive shaft misalignment. This feature is particularly indispensable for gears for robotics, for example to prevent a robot arm from falling down.

Jakob Antriebstechnik offers the coupling with all common splined shaft gears DIN 5480. Torques of up to 4000 Nm can be transmitted, the maximum shaft diameter is 102 mm.

Other nominal dimensions or special designs are available from the manufacturer on request.

Weitere Infos zu dieser Pressemeldung:
Unternehmensinformation / Kurzprofil:
Bereitgestellt von Benutzer: PresseBox
Datum: 05.09.2024 - 16:38 Uhr
Sprache: Deutsch
News-ID 711059
Anzahl Zeichen: 1988

contact information:
Contact person: Jan Möller
Town:

Kleinwallstadt

Phone: +49 (6022) 2208-55

Kategorie:

Tradeshows

Diese Pressemitteilung wurde bisher 308 mal aufgerufen.


Die Pressemitteilung mit dem Titel:
"Form-fitted hub version"
steht unter der journalistisch-redaktionellen Verantwortung von

JAKOB Antriebstechnik GmbH (Nachricht senden)

Beachten Sie bitte die weiteren Informationen zum Haftungsauschluß (gemäß TMG - TeleMedianGesetz) und dem Datenschutz (gemäß der DSGVO).

Metal bellows coupling KG ...

The metal bellows couplings series KG, optionally also available in stainless steel as series "KG-VA", meets high requirements. The transmission is made via torsionally rigid, two-, four- or six shaft stainless steel bellows, the couplings ...

Metal bellows coupling KP with clamping hubs ...

The metal bellows coupling of the KP series is characterized by its short design and a 4-wave bellows with two radial clamping hubs. This compact design is ideal for applications with minimal shaft spacing and limited space. The high torsional rigidi ...

Power clamping nut MDA multiplies tightening torque ...

The current model of the mechanical power clamping nut MDA combines the simplest, manual operation at low tightening torques ??with the highest clamping forces. The interior can multiply the manual tightening torque by means of a robust gear transmis ...

Alle Meldungen von JAKOB Antriebstechnik GmbH